Turning The Scanner On Or Off - GRAPHTEC CS1000EV User Manual

3. PREPARING TO OPERATE THE SCANNER

3.5 Turning the Scanner On or Off

Whenever the scanner's Power switch is turned on, the POWER, PAPER, and ERROR lamps
on the control panel light up. When the scanner has been initialized, the POWER lamp
lights up.
If you have a CS1100EV model, please refer to Section 2.2, "Part Names and Functions",
page 2-5, for the location of the Power switch.
When resetting the scanner by turning it off then back on again, wait at least three
seconds before turning it back on.
3 – 6 CS1000EV/1100EV