Oracle SPARC T5-8 Service Manual page 84

Remove a Hard Drive
a.
At the Oracle Solaris prompt, type the cfgadm -al command to list all drives
in the device tree, including drives that are not configured:
#
This command lists dynamically reconfigurable hardware resources and shows their
operational status. In this case, look for the status of the drive you plan to remove. This
information is listed in the Occupant column.
Example:
Ap_id
...
c2
c2::w5000cca00a76d1f5,0
c3
c3::w5000cca00a772bd1,0
c4
c4::w5000cca00a59b0a9,0
...
You must unconfigure any drive whose status is listed as configured, as described in
3b.
b.
Unconfigure the drive using the cfgadm -c unconfigure command.
Example:
#
Replace c2::w5000cca00a76d1f5,0 with the drive name that applies to your situation.
c. Verify that the drive's blue Ready to Remove LED is lit.
Press the drive release button to unlock the drive.
4.
84 SPARC T5-8 Server Service Manual • November 2015
cfgadm -al
cfgadm -c unconfigure c2::w5000cca00a76d1f5,0
Type Receptacle
scsi-sas connected
disk-path connected
scsi-sas connected
disk-path connected
scsi-sas connected
disk-path connected
Occupant Condition
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
configured unknown
Step