target is the remote location where you want to store the configuration information.
■
For example:
dump -destination tftp://129.99.99.99/pathname
->
Take the necessary ESD precautions.
2.
See
"Prevent ESD Damage" on page
3.
Remove the main module from the server.
See
"Remove the Main Module" on page
4.
Locate the service processor card on the main module.
See
"Main Module Internal Component Locations" on page
Grasp the service processor card by the two grasp points, and lift up to
5.
disengage the service processor card from the connectors on the motherboard.
57.
91.
17.
Servicing the Service Processor Card
Remove the Service Processor Card
111
Need help?
Do you have a question about the SPARC T5-8 and is the answer not in the manual?
Questions and answers