Started the system.
■
See
"Power On the Server (Oracle ILOM)" on page
2.
Check the front or rear panel LEDs for the following indications:
Green System OK LED – illuminated
■
Amber System Fault LED – not illuminated
■
Amber System Fan Fault LED – not illuminated
■
See
"Front Panel Controls and LEDs" on page 31
LEDs" on page 33
If these conditions are not met, perform the actions described in
Process" on page
25.
3.
Log in to Oracle ILOM.
See
"Log In to Oracle ILOM (Service)" on page
4.
Start the faultmgmt shell.
start SP/faultmgmt/shell
->
Are you sure you want to start the faultmgmt shell (y/n)?
faultmgmtsp>
5.
Use the fmadm faulty command to determine if the server is operating normally.
If a fault was detected, see
■
If no fault was detected, the fan module was installed successfully.
■
Related Information
"Determine Which Fan Module Is Faulty" on page 142
■
"Install a Fan Module" on page 145
■
for the LED locations.
"Diagnostics Process" on page
192.
and
"Rear Panel Controls and
"Diagnostics
28.
y
25.
Servicing Fan Modules
Verify the Fan Module
147
Need help?
Do you have a question about the SPARC T5-8 and is the answer not in the manual?
Questions and answers