Oracle SPARC T5-8 Service Manual page 132

Verify the Front I/O Assembly
faultmgmtsp>
4.
Use the fmadm faulty command to determine if the server is operating normally.
If a fault was detected, see
■
If no fault was detected, the front I/O assembly was installed successfully.
■
Related Information
"Remove the Front I/O Assembly" on page 127
■
"Install the Front I/O Assembly" on page 130
■
132 SPARC T5-8 Server Service Manual • November 2015
"Diagnostics Process" on page 25.