Verify The Storage Backplane - Oracle SPARC T5-8 Service Manual

Related Information
"Remove a Storage Backplane" on page 99
■
"Verify the Storage Backplane" on page 107
■

Verify the Storage Backplane

1. Ensure that you have completed the following:
Applied power to the server.
■
See "Connect the Power Cords" on page
■ Started the system.
See "Power On the Server (Oracle ILOM)" on page
2. Log in to Oracle ILOM.
See "Log In to Oracle ILOM (Service)" on page
3.
Start the faultmgmt shell.
start SP/faultmgmt/shell
->
Are you sure you want to start the faultmgmt shell (y/n)?
faultmgmtsp>
4.
Use the fmadm faulty command to determine if the server is operating normally.
If a fault was detected, see
■
If no fault was detected, the storage backplane was installed successfully.
■
Related Information
"Remove a Storage Backplane" on page 99
■
"Install a Storage Backplane" on page 103
■
191.
28.
"Diagnostics Process" on page
Verify the Storage Backplane
192.
y
25.
Servicing the Storage Backplanes 107