Oracle SPARC T5-8 Service Manual page 106

Install a Storage Backplane
5. Connect the two storage backplane cables to the storage backplane and the
motherboard.
No.
1.
2.
6. Install the main module back into the server.
See "Install the Main Module" on page
7. Install the hard drives that you removed back into the main module.
Refer to the notes that you took when removing the hard drives to install them back into their
original slots. See
8. Power on the server.
See "Returning the Server to
9. Verify the installation.
See "Verify the Storage Backplane" on page
106 SPARC T5-8 Server Service Manual • November 2015
Description
Data cable
Power cable
"Install a Hard Drive" on page
Operation".
95.
85.
107.