Servicing The Service Processor Card; Determine If The Service Processor Card Is Faulty - Oracle SPARC T5-8 Service Manual

Servicing the Service Processor Card

The service processor card is a cold-service component that can be replaced only after you have
removed the main module. For the location of the service processor card, see
Internal Component Locations" on page
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. This discharge can cause server components to fail.
These topics describe how to service the service processor card.
Steps Description
1.

Determine if the service processor card is faulty.

2. Remove the main module so that you can replace the
service processor card.
3. Replace the service processor card.
4. Install the main module after you have replaced the
service processor card.
5. Verify the replacement.
Related Information
"Identifying Components"
■
"Detecting and Managing Faults"
■
"Preparing for Service"
■
"Component Service Task Reference" on page 23
■
"Returning the Server to Operation"
■
Determine if the Service Processor Card Is Faulty
When a fault occurs with the service processor card, the following LEDs are lit:
17.
Links
"Determine if the Service Processor Card Is
Faulty" on page 109
"Remove the Main Module" on page 91
■ "Remove the Service Processor
Card" on page 110
■ "Install the Service Processor
Card" on page 112
"Install the Main Module" on page 95
"Verify the Service Processor
Card" on page 114
Servicing the Service Processor Card
"Main Module
109