Oracle SPARC T5-8 Service Manual page 69

The levers should click into place when the module is fully seated in the server.
Determine your next step.
6.
If you replaced a faulty processor module or DIMM, see
■
Server to Operation".
■ If you installed new processor modules to upgrade the server, return to
"Server Upgrade Process" on page
7. Determine your next step.
■ If you replaced DIMMs, see
■ If you replaced a processor module, see
Module" on page
Install a Processor Module or Processor Filler Module
59.
"Verify the DIMM" on page
70.
"Returning the
80.
"Verify the Processor
Servicing Processor Modules 69