Servicing The Storage Backplanes; Remove A Storage Backplane - Oracle SPARC T5-8 Service Manual

Servicing the Storage Backplanes

The storage backplances are cold-service components that can be replaced after you remove
the main module. For the location of the storage backplanes, see
Component Locations" on page
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. This discharge can cause server components to fail.
These topics describe service procedures for the storage backplanes in the server.
Steps Description
1.

Remove a storage backplane.

2. Install a storage backplane.
3. Verify the installation.
Related Information
"Identifying Components"
■
"Detecting and Managing Faults"
■
"Preparing for Service"
■
"Component Service Task Reference" on page 23
■
"Returning the Server to Operation"
■
Remove a Storage Backplane
The storage backplances are cold-service components that can be replaced after you remove the
main module.
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. This discharge can cause server components to fail.
1. Power off the server, and disconnect the power cords.
17.
Links
"Remove a Storage Backplane" on page 99
"Install a Storage Backplane" on page 103
"Verify the Storage Backplane" on page 107
"Main Module Internal
Servicing the Storage Backplanes 99