Servicing The Rear I/O Module; Determine If The Rear I/O Module Is Faulty - Oracle SPARC T5-8 Service Manual

Servicing the Rear I/O Module

The rear I/O module is a cold-service component that can be replaced only after you have
removed all of the power from the server. For the location of the PCIe cards, see
Module Port Locations" on page
This procedure requires that you handle components that are sensitive to electrostatic
Caution -
discharge. This discharge can cause server components to fail.
These topics describe service procedures for the rear I/O module in the server.
Steps Description
1.

Determine if the rear I/O module is faulty.

2. Replace the rear I/O module.
3. Verify the replacement.
Related Information
"Identifying Components"
■
"Detecting and Managing Faults"
■
"Preparing for Service"
■
"Component Service Task Reference" on page 23
■
"Returning the Server to Operation"
■
Determine if the Rear I/O Module Is Faulty
1. Log in to Oracle ILOM.
See "Log In to Oracle ILOM (Service)" on page
2.
Start the faultmgmt shell.
-> start SP/faultmgmt/shell
21.
Links
"Determine if the Rear I/O Module Is
Faulty" on page 173
■ "Remove the Rear I/O Module" on page 174
■ "Install the Rear I/O Module" on page 176
"Verify the Rear I/O Module" on page 178
28.
"Rear I/O
Servicing the Rear I/O Module 173