Disconnect The Power Cords - Oracle SPARC T5-8 Service Manual

Disconnect the Power Cords

Caution -
corruption might occur.
1. Press and hold the Power button for four seconds.
2. If you are servicing a cold-service component, or if you are upgrading the server,
disconnect the power cords.
See "Disconnect the Power Cords" on page
Related Information
"Prepare to Power Off the Server" on page 54
■
"Disconnect the Power Cords" on page 56
■
"Configuring Boot and Restart Behavior" in SPARC and Netra SPARC T5 Series Servers
■
Administration Guide
Disconnect the Power Cords
Ensure that you have shut down the system.
1.
See:
"Power Off the Server (SP Command)" on page 54
■
"Power Off the Server (Power Button - Graceful)" on page 55
■
2. Disconnect all of the power cords.
Caution -
power cords before accessing any cold-serviceable components. See
Categories" on page
3. Determine your next step.
If you are servicing a component, return to the procedure for that component.
■
If you are upgrading the server, return to
■
Related Information
"Prepare to Power Off the Server" on page 54
■
"Power Off the Server (SP Command)" on page 54
■
"Power Off the Server (Power Button - Graceful)" on page 55
■
"Power Off the Server (Emergency Shutdown)" on page 55
■
56 SPARC T5-8 Server Service Manual • November 2015
All applications and files are closed abruptly without saving changes. File system
Because 3.3v standby power is always present in the server, you must unplug the
52.
56.
"Server Upgrade Process" on page
"Component Service
59.