Oracle SPARC T5-8 Service Manual page 77

Do not leave DIMM slots empty. All of the DIMM slots must have a DIMM.
Caution -
Take the necessary ESD precautions.
1.
See "Prevent ESD Damage" on page
Remove the PM with the faulty DIMM.
2.
See "Remove a Processor Module or Processor Filler Module" on page
3. Locate the DIMMs that need to be replaced.
See "Determine Which DIMM Is Faulty (FMA)" on page 73
Is Faulty (LEDs)" on page
4. Push down on the ejector tabs on each side of the DIMM until the DIMM is
released.
Caution - DIMMs and heat sinks on the motherboard might be hot.
Grasp the top corners of the faulty DIMM, and lift it out of its slot.
5.
6. Place the DIMM on an antistatic mat.
Repeat Step 4 through Step 6 for any other DIMMs that you intend to remove.
7.
8. Determine your next step.
If you are replacing a faulty DIMM, see
■
57.
75.
"Install a DIMM" on page
Remove a DIMM or DIMM Filler Panel
63.
or "Determine Which DIMM
78.
Servicing DIMMs 77