Oracle SPARC T5-8 Service Manual page 157

The Power OK LED should go off, indicating that the card is ready to be removed.
b. Go to Step
■ CLI:
At the Oracle Solaris prompt, list all of the PCIe devices in the device
a.
tree:
hotplug list -l | grep PCIE
#
This command lists dynamically reconfigurable PCIe resources and shows their
operational status. In this case, look for the status of the card you plan to remove.
Example:
/pci@300/pci@1/pci@0/pci@6 [PCIE1] EMPTY
/pci@340/pci@1/pci@0/pci@6 [PCIE3] ENABLED
/pci@380/pci@1/pci@0/pci@a [PCIE9] EMPTY
/pci@3c0/pci@1/pci@0/pci@e [PCIE11] EMPTY
/pci@400/pci@1/pci@0/pci@c [PCIE2] EMPTY
/pci@440/pci@1/pci@0/pci@c [PCIE4] EMPTY
/pci@480/pci@1/pci@0/pci@4 [PCIE10] EMPTY
/pci@4c0/pci@1/pci@0/pci@8 [PCIE12] EMPTY
/pci@500/pci@1/pci@0/pci@e [PCIE5] EMPTY
/pci@540/pci@1/pci@0/pci@e [PCIE7] ENABLED
/pci@580/pci@1/pci@0/pci@a [PCIE13] EMPTY
/pci@5c0/pci@1/pci@0/pci@8 [PCIE15] EMPTY
/pci@600/pci@1/pci@0/pci@8 [PCIE6] EMPTY
/pci@640/pci@1/pci@0/pci@8 [PCIE8] EMPTY
/pci@680/pci@1/pci@0/pci@4 [PCIE14] EMPTY
/pci@6c0/pci@1/pci@0/pci@4 [PCIE16] EMPTY
b. Disable the PCIe card.
Example:
hotplug disable /pci@340/pci@1/pci@0/pci@6 PCIE3
#
6. Power off the PCIe card.
Example:
hotplug poweroff /pci@340/pci@1/pci@0/pci@6 PCIE3
#
Disconnect any transceivers, if applicable, and all of the cables connected to the
7.
PCIe card.
Label the cables to ensure proper connection to the replacement card.
Tip -
7.
Remove a Card Carrier
Servicing PCIe Cards 157