Submaster Pages - ETC microVision FX User Manual

4 - 32

Submaster pages

MicroVision FX has five pages of submasters. You can record six sub-
masters in each page. In Stage mode, the Submaster/cue window
indicates which submasters are recorded in the currently loaded page. It
also indicates if active submasters originated from a different page.
When you change submaster pages, any submasters set at a nonzero
level remain loaded with the original look until you pull the submaster
pot down to zero.
MicroVision FX indicates that a submaster is recorded in a page other
than the currently loaded page by displaying and highlighting the page
number under the submaster number.
To switch pages, press [Page] and enter the page number you want.
When you load a new page, any submasters set at a level above zero
remain on stage until you pull them down to zero. This prevents the
stage from going black when you switch pages. Submasters remaining
from the previous page are indicated by the displayed page number on
the Submaster/cue description line.
Submasters from the new page are not loaded into pots until you pull
them down to zero.
Note: When you read a new show into the console from a disk,
MicroVision FX holds current fader and submaster outputs.
FX
MicroVision