Select Cable Component; Select Cable Adjustment - Suzuki Grand Vitara Manual

Transmission / transaxle
Hide thumbs Also See for Grand Vitara:
Table of Contents

Advertisement

Select Cable Component

2
(a)
1. Manual selector assembly
2. Manual selector assembly mounting bolt
3. Select cable
4. Select cable bracket
5. Manual select lever

Select Cable Adjustment

1) Loosen manual select cable nut.
2) Shift select lever to "N".
3) Align center line (1) on manual shift shaft (2) to "N"
reference line (3) as shown in figure.
1
www.CarGarage.ir
1
6
(b)
8
7
6. Manual select cable nut
7. Manual select lever nut
8. Transmission range sensor
9. Transmission range sensor bolt
: 17.5 N⋅m (1.75 kgf-m, 13.0 lb-ft)
S5JB0A5106048
3
2
I5JB0A510038-02
www.CarGarage.ir
Automatic Transmission/Transaxle:
3
9
(c)
5
4) Tighten manual select cable nut (1) to specified
torque.
Tightening torque
Manual select cable nut (a): 13 N·m (1.3 kgf-m,
9.5 lb-ft)
1, (a)
5) After select cable was adjusted, check for the
following.
• Push vehicle with selector lever shifted to "P".
Vehicle should not move.
• Vehicle can not be driven in "N".
• Vehicle can be driven in "D", "3", "2" and "L".
• Vehicle can be backed in "R".
S5JB0A5106047
4
(d)
I5JB0A510035-01
: 13 N⋅m (1.3 kgf-m, 9.5lb-ft)
: 12.5 N⋅m (1.25 kgf-m, 9.0 lb-ft)
: 5.3 N⋅m (0.53 kgf-m, 4.0 lb-ft)
I5JB0A510036-02
5A-83

Advertisement

Table of Contents
loading

Table of Contents