Switchport Pvid; Show Vlan Summary - TP-Link TL-SG3210 Cli Reference Manual
Jetstream l2 managed switch
Hide thumbs
Also See for TL-SG3210:
- User manual (292 pages) ,
- Cli reference manual (199 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
TL-SG3424(config-if)# switchport general allowed vlan 2 tagged
switchport pvid
Description
The switchport pvid command is used to configure the PVID for the switch
ports.
Syntax
switchport pvid vlan-id
Parameter
vlan-id —— Specify IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Specify the PVID of port 3 as 1:
TL-SG3424(config)# interface gigabitEthernet 1/0/3
TL-SG3424(config-if)# switchport pvid 1
show vlan summary
Description
The show vlan summary command is used to display the summarized
information of IEEE 802.1Q VLAN.
Syntax
show vlan summary
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the summarized information of IEEE 802.1Q VLAN:
TL-SG3424(config)# show vlan summary
29
Hide quick links:
Advertisement
Table of Contents
