Ipv6 Mld Filter; Show Ipv6 Mld Snooping - TP-Link JetStream T3700G-52TQ Cli Reference Manual

T3700G-52TQ JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Configure one of the filter multicast address entry as range ff80::1234 to
ff80::1235 in profile 1:
T3700G-52TQ(config)# ipv6 mld profile 1
T3700G-52TQ(config-igmp-profile)#range ff80::1234 ff80::1235

32.20 ipv6 mld filter

Description
The ipv6 mld filter command is used to bind the specified profile to the
interface. To delete the binding, please use no ipv6 mld filter command.
Syntax
ipv6 mld filter
no ipv6 mld filter
Parameter
profile-id
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Example
Bind profile 1 to interface gigabitEthernet 1/0/2:
T3700G-52TQ(config)# interface gigabitEthernet 1/0/2
T3700G-52TQ(config-if)# ipv6 mld filter 1

32.21 show ipv6 mld snooping

Description
The show ipv6 mld snooping command is used to display the global
configuration of MLD Snooping.
Syntax
show ipv6 mld snooping
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of MLD Snooping:
profile-id
—— Specify the profile ID, ranging from 1 to 999.
276