Dot1X Max-Reauth-Req - TP-Link T2500G-10TS Cli Reference Manual

Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the supplicant's timeout value as 5 seconds:
T2500G-10TS(config)#dot1x timeout supplicant-timeout 5
16.9

dot1x max-reauth-req

Description
The dot1x max-reauth-req command is used to configure the maximum
transfer times of the repeated authentication request when the server cannot
be connected. To restore to the default value, please use no dot1x
max-reauth-req command.
Syntax
dot1x max-reauth-req
no dot1x max-reauth-req
Parameter
times
request, ranging from 1 to 9 in times. By default, the value is 3.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the maximum transfer times of the repeated authentication
request as 5:
T2500G-10TS(config)#dot1x max-reauth-req 5
times
—— The maximum transfer times of the repeated authentication
120