Dot1X Max-Reauth-Req; Dot1X - TP-Link JetStream TL-SL5428E Cli Reference Manual

Command Mode
Global Configuration Mode
Example
Configure the quiet period as 100 seconds:
TL-SL5428E(config)#dot1x timeout quiet-period 100

dot1x max-reauth-req

Description
The dot1x max-reauth-req command is used to configure the maximum
transfer times of the repeated authentication request when the server cannot be
connected. To restore to the default value, please use no dot1x
max-reauth-req command.
Syntax
dot1x max-reauth-req times
no dot1x max-reauth-req
Parameter
times —— The maximum transfer times of the repeated authentication request,
ranging from 1 to 9 in times. By default, the value is 3.
Command Mode
Global Configuration Mode
Example
Configure the maximum transfer times of the repeated authentication request as
5:
TL-SL5428E(config)#dot1x max-reauth-req 5

dot1x

Description
The dot1x command is used to enable the IEEE 802.1X function for a specified
port. To disable the IEEE 802.1X function for a specified port, please use no
dot1x command.
TL-SL5428E JetStream L2 Managed Switch CLI Guide
99