Show Wac Ports - D-Link xStack Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To show WAC:
DGS-3620-28SC:admin# show wac
Command: show wac
Web-based Access Control
-----------------------------
State
Method
Redirect Path
Virtual IP
Virtual IPv6
Switch HTTP Port
RADIUS Authorization
Local Authorization
DGS-3620-28SC:admin#
115-14

show wac ports

Description
This command is used to display WAC port information.
Format
show wac ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of member ports to display the status.
Restrictions
None.
Example
To display WAC ports 1 to 3:
: Enabled
: RADIUS
: http://www.dlink.com
: 0.0.0.0
: 2000::20
: 80 (HTTP)
: Enabled
: Enabled
1224