Show Wac Ports - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Command: show wac
Web-based Access Control
-----------------------------
State
Method
Redirect Path
Virtual IP
Virtual IPv6
Switch HTTP Port
RADIUS Authorization
Local Authorization
DGS-3420-28SC:admin#

34-14 show wac ports

Description
This command is used to display WAC port information.
Format
show wac ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of member ports to display the status.
Restrictions
None.
Example
To display WAC ports 1 to 3:
DGS-3420-28SC:admin# show wac ports 1-3
Command: show wac ports 1-3
Port State
------- --------
1 Disabled
2 Disabled
3 Disabled
DGS-3420-28SC:admin#
: Enabled
: RADIUS
: http://www.dlink.com
: 0.0.0.0
: 2000::20
: 80 (HTTP)
: Enabled
: Enabled
Aging Time Idle Time
(min) (min)
------------ ----------
1440 Infinite
1440 Infinite
1440 Infinite
1056
Block Time
(sec)
-----------
60
60
60