Show Stp Ports - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual

show stp ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show stp port 9 on switch one:
DGS3100# show stp ports 1:9
MSTP Port Information
---------------------------------
Port Index : 1:9,Port STP enabled
External PathCost : Auto/200000,Edge Port : No /No,P2P : Auto /Yes
Msti
-------- ---------------------------------- ------------------------- ----- ---------------- ----------
0
DGS3100#
show stp instance_id
Purpose
Syntax
Description
65
Max Age
Hello Time
Forward Delay
Max Age
Forwarding BPDU
DGS3100#
To display the Switch's current instance_id configuration.
show stp ports {<portlist> | <ch1-32>}
The show stp ports command displays the STP Instance Settings
and STP Instance Operational Status currently implemented on the
Switch.
<portlist> – A port or range of ports to be configured. The port list is
specified by listing switch number and the beginning port number on
that switch, separated by a colon. Then the highest port number of
the range is specified. The beginning and end of the port list range
are separated by a dash. For example, 1:3 specifies switch number
1, port 3. 1:22 specifies switch number 1, port 22. 1:3-22 specifies all
of the ports of switch 1, between port 3 and port 22 − in numerical
order.
<ch1-32> − a port-channel.
None.
Designated Bridge
8000 00:23:27:26:46:00
To display the Switch's STP instance configuration
show stp instance_id <value 0-15>}
The show stp instance_id command displays the Switch's current
STP Instance Settings and the STP Instance Operational Status.
: 20
: 2
: 15
: 20
: Enabled
Internal PathCost Prio Status
200000
Role
128 Disabled Disabled