USE AND STORAGE OF SUPPLIES
Sorter Stapler (Option)
To avoid problems caused by curled copies, try turning over the paper stack in
the 500-sheet, 1,700-sheet, or optional large capacity tray. If there is no im-
provement, change to copy paper with less curl.
Do not stack more than 20 translucent paper on the proof tray.
Copy Paper
Copy paper of the types or in the conditions listed below are not recommended
for this copier.
• Folded, curled, creased, or damaged paper
• Torn paper
• Damp paper
• Perforated paper
• Paper with conductive or low electrical resistance such as carbon or sliver
coating.
• Wavy paper
• Thermal paper, art paper
• Thin paper that has low stiffness
• Adhesive labels
OHP transparencies and translucent paper should be fanned to get air between
the sheets before loading.
Do not touch copy paper if your fingers are wet or oily; finger prints may appear
on the copy.
Load paper with the copy side down in the paper trays, and with the copy side
up in the optional large capacity tray. If copies are curled, try turning the copy
paper over in the tray. If there is no improvement, change to copy paper with
less curl.
Do not use the copy paper that has already been copied on.
138
USE AND STORAGE OF SUPPLIES