Bus Operation Scanning; Icl Commands - Keithley 3700 series Reference Manual

Section 7: Scanning
3. The channels are scanned in the order they were added to the list.
4. To abort the scan:
NOTE
Buffer
To recall scanned readings stored in the buffer, press the REC key and turn the wheel to
navigate through the buffer. See
readings. When finished, make sure to exit from buffer recall (press the EXIT key). Also see
Buffer (Data Storage and Retrieval)

Bus operation scanning

ICL commands

The following list contains ICL commands associated with triggers and bus operation scanning:







7-10

Bus initiated scan: Use an ICL command such as scan.execute, scan.background,
scan.nobufferbackground, as desired.

Front panel scan: Press the EXIT key.

Bus initiated scan: Use the scan.abort ICL command.
While the scan is enabled, most front panel keys are inoperative and will cause the
message "ERROR CODE: 5522 Scan Running, Must Abort Scan" to be displayed.
trigger.blender[N].clear
trigger.blender[N].orenable
trigger.blender[N].overrun
trigger.blender[N].stimulus[N]
trigger.blender[N].wait
trigger.timer[N].clear (on page 9-218)
trigger.timer[N].stimulus
Series 3700 System Switch/Multimeter Reference Manual
Recalling readings
(see "Buffer: Data Storage and Retrieval" on page 6-1).
(on page 9-216)
(on page 9-216)
(on page 9-216)
(on page 9-217)
(on page 9-217)
(on page 9-210)
Document Number: 3700S-901-01 Rev. A / August 2007
(on page 6-3) for details on recalling buffer