Keithley 3700 series Reference Manual page 137

Series 3700 System Switch/Multimeter Reference Manual
Commands
To set register bits:
status.system5.enable = status.system.EXTENSION_BIT
status.system5.enable = status.system.EXT
status.system5.enable = status.system.NODEn
To read registers:
print(status.system5.enable)
print(status.system5.condition)
print(status.system5.event)
Refer to the following table for available n values:
Command
status.system
status.system2
status.system3
status.system4
status.system5
Document Number: 3700S-901-01 Rev. A / August 2007
Section 8: Status Model
n value
1 to 14
15 to 28
29 to 42
43 to 56
57 to 64
Bit
B0
B0
Bn
8-15