Keithley 3700 series Reference Manual page 287

Series 3700 System Switch/Multimeter Reference Manual
lan.status.reset
Example
lan.status.speed
Attribute
Usage
Remarks
Example
lan.status.subnetmask
Attribute
Usage
Remarks
Example
lan.trigger[N].assert
Function
Usage
Remarks
Also see
Example
Document Number: 3700S-901-01 Rev. A / August 2007
To reset the LAN interface:
lan.status.reset()
Reads present LAN speed.
speed = lan.status.speed
speed: LAN speed given in Mbps. It will be either 10 or 100.
This attribute indicates the transmission speed currently in use by the LAN interface.
To display the Series 3700 transmission speed presently in use:
print(lan.status.speed)
 1.000000000e+002
Reads present LAN subnet mask.
mask = lan.status.subnetmask
mask: A string specifying the subnet mask in dotted decimal notation.
This attribute indicates the LAN subnet mask currently in use.
To display the Series 3700 subnet mask presently in use:
print(lan.status.subnetmask)
 255.255.255.0
Simulates the occurrence of the trigger and generates the corresponding event id.
lan.trigger[N].assert()
N: The trigger packet over LAN to assert (1–8).
This function will generate a trigger for the specified LAN packet.
tsplink.trigger[N].clear (on page 9-212)
tsplink.trigger[N].mode (on page 9-212)
tsplink.trigger[N].overrun
tsplink.trigger[N].release
tsplink.trigger[N].triggersource
tsplink.trigger[N].wait (on page 9-214)
To create a trigger with LAN packet 5:
lan.trigger[5].assert()
Section 9: Instrument Control Library (ICL)
(on page 9-213)
(on page 9-214)
(see "tsplink.trigger[N].triggerstimulus" on page 9-214)
9-143