Operation Keys - Keithley 3700 series Reference Manual

Series 3700 System Switch/Multimeter Reference Manual
CONFIG key
Use this key to access the an attribute menu that enables you to configure channels, channel
patterns, DMM functions, or settings, reading buffer, scans, and other operations. Refer to the
following for additional information:







RESET switch
Use this switch to restore the Series 3700 factory default LAN settings. Refer to the reference
manual
represents the specific command) for factory default information.

Operation keys

CHAN key
Pressing this key opens the CHANNEL ACTION MENU that contains the following menu items:





CHAN key configuration
Pressing the CONFIG key and then the CHAN key opens the CHANNEL ATTRibute MENU.
This menu contains:
Document Number: 3700S-901-01 Rev. A / August 2007
CHAN key configuration
PATT key configuration
SCAN key configuration
DMM key configuration
LIMIT key configuration
REL key configuration
FILTER key configuration
LAN functions (see "ICL LAN commands" on page 9-132) (lan.config.x, where x
OPEN: This menu item opens the specified channels for switching aspects. Related
Instrument Control Library (ICL) command:
CLOSE: This menu item closes specified channels. These closures are appended to the
already closed channels. Related ICL command:
EXCLOSE: This menu item closes the specified items so they are exclusively closed.
Related ICL commands:
channel.exclusiveslotclose
EXSLOTCLOSE: This menu item exclusively closes specified channels on the specified
slots. Related ICL command:
RESET: This menu item resets channel and channel pattern aspects of the system to
factory default settings. Related ICL command:
(on page 3-7)
(on page 3-9)
(on page 3-10)
(on page 3-11)
(on page 3-15)
(on page 3-15)
(on page 3-16)
channel.open
channel.exclusiveclose
(on page 9-23)
channel.exclusiveslotclose
Section 3: Using the Front Panel
(on page 9-34)
channel.close (on page 9-18)
(on page 9-21),
(on page 9-23)
channel.reset (on page 9-41)
3-7