Keithley 3700 series Reference Manual page 73

Series 3700 System Switch/Multimeter Reference Manual
INSERT key
Pressing this key appends the present channel to the scan list.
DELETE key
Pressing this key deletes the present channel (including function) from the scan list. If the
present channel is not contained in the scan list, no error is reported.
TRIG key
Pressing this key triggers a measurement equivalent to the
command.
MENU key
Pressing this key opens the MAIN MENU that contains the following menu items:











EXIT key
Cancels the selection and moves back to the measurement display.
ENTER key
Pressing this key accepts selection, moves to next choice, or back to measurement display.
NOTE
Document Number: 3700S-901-01 Rev. A / August 2007
SCRIPT: Opens the SCRIPT menu that contains LOAD and SAVE menu items.
SETUP: Opens the SETUP MENU that contains SAVE, RECALL, POWERON, and
RESET menu items.
GPIB: Opens the GPIB MENU that contains ADDRESS and ENABLE menu items.
LAN: Opens the LAN MENU that contains STATUS, CONFIG, APPLY, RESET, and
ENABLE menu items.
TSPLINK: Opens the TSPLINK MENU that contains NODE and RESET menu items.
UPGRADE: Questions whether or not the unit is to be upgraded.
CHANNEL: This menu item opens the CONNECT MENU that allows you to select a rule
(BBM, MBB, or OFF), or to connect sequentially (ON or OFF setting). Related ICL
command: channel.connectrule
DISPLAY: Opens the DISPLAY menu. Selecting the TEST item opens the DISPLAY
TESTS MENU which contains KEYS and DISPLAY-PATTERNS menu items. Use KEYS
to verify the operation of the keys. Use DISPLAY-PATTERNS to verify each segment of
the display.
DIGIO: Opens the DIGIO I/O menu that is used to set DIGIO-OUTPUT and WRITE-
PROTECT menu items.
BEEPER: Use to enable or disable the beeper, along with selection KEYCLICK option.
SYSTEM-INFO: Opens the SYSTEM INFORMATION menu that can query FIRMWARE,
SERIAL#, and CAL information.
Pressing the wheel performs the same function as the ENTER key.
dmm.measure
(on page 9-20)
Section 3: Using the Front Panel
(on page 9-102)
3-17