Tsplink.trigger - Keithley 3700 series Reference Manual

Section 9: Instrument Control Library (ICL)

tsplink.trigger

The functions in this group control the tsp-link's trigger event detector.
tsplink.trigger[N].assert
Function
Usage
Remarks
Also see
tsplink.trigger[N].clear
Function
Usage
Remarks
Also see
9-212
Simulates the occurrence of the trigger and generates the corresponding event id.
tsplink.trigger[N].assert()
N: (In) The trigger line to assert (1–3).
This function will generate a trigger pulse on the given TSP-Link trigger line.
tsplink.trigger[N].clear (on page 9-212)
tsplink.trigger[N].mode (on page 9-212)
tsplink.trigger[N].overrun
tsplink.trigger[N].release
tsplink.trigger[N].triggersource
tsplink.trigger[N].wait (on page 9-214)
Clear the event detector for a trigger.
tsplink.trigger[N].clear()
N: (In) The trigger line (1–3).
A trigger's event detector remembers if an event has been detected since the last
tsplink.trigger[line].wait call. This function clears a trigger's event detector and
discards the previous history of the trigger line.
tsplink.trigger[N].mode (on page 9-212)
tsplink.trigger[N].overrun
tsplink.trigger[N].release
tsplink.trigger[N].triggersource
tsplink.trigger[N].wait (on page 9-214)
Series 3700 System Switch/Multimeter Reference Manual
(on page 9-213)
(on page 9-214)
(see "tsplink.trigger[N].triggerstimulus" on page 9-214)
(on page 9-213)
(on page 9-214)
(see "tsplink.trigger[N].triggerstimulus" on page 9-214)
Document Number: 3700S-901-01 Rev. A / August 2007