Keithley 3700 series Reference Manual page 338

Section 9: Instrument Control Library (ICL)
status.operation.user.*
Attribute
Usage
9-194
Operation user event register set.
Reads condition, enable, event, NTR and PTR registers:
operreg = status.operation.user.condition
operreg = status.operation.user.enable
operreg = status.operation.user.event
operreg = status.operation.user.ntr
operreg = status.operation.user.ptr
Writes to condition, enable, NTR and PTR registers:
status.operation.user.condition = operreg
status.operation. user. enable = operreg
status.operation.user.ntr = operreg
status.operation.user.ptr = operreg
Set operreg to one of the following values:

To clear all bits: 0

To set user BIT0: status.operation.user.BIT0

To set user BIT1: status.operation.user.BIT1

To set user BIT2: status.operation.user.BIT2

To set user BIT3: status.operation.user.BIT3

To set user BIT4: status.operation.user.BIT4

To set user BIT5: status.operation.user.BIT5

To set user BIT6: status.operation.user.BIT6

To set user BIT7: status.operation.user.BIT7

To set user BIT8: status.operation.user.BIT8

To set user BIT9: status.operation.user.BIT9

To set user BIT10: status.operation.user.BIT10

To set user BIT11: status.operation.user.BIT11

To set user BIT12: status.operation.user.BIT12

To set user BIT13: status.operation.user.BIT13

To set user BIT14: status.operation.user.BIT14
Series 3700 System Switch/Multimeter Reference Manual
Document Number: 3700S-901-01 Rev. A / August 2007
.condition
.enable
.event
.ntr
.ptr