Measure And Switching Capabilities; Warranty Information; Displaying The Unit's Serial Number; Figure 1-1: Dmm Measurement Capabilities - Keithley 3700 series Reference Manual

Section 1: Introduction

Measure and switching capabilities

The basic measurement capabilities of Series 3700 systems are summarized in the following
figure.

Figure 1-1: DMM measurement capabilities

Warranty information

Detailed warranty information is located at the front of this manual. Should your Series 3700
require warranty service, contact the Keithley Instruments representative or authorized repair
facility in your area for further information. When returning the instrument for repair, be sure to
complete the service form at the back of this manual and give it to the repair facility with all
relevant information.
NOTE
WARNING

Displaying the unit's serial number

To display the serial number on the front panel:
1-2
The service form requires the serial number of the Series 3700. The serial number
label is located inside the unit on the bottom panel. The serial number can be viewed
by removing the slot covers and/or switching modules from the mainframe.
Before removing (or installing) switching modules, make sure you turn off
the Series 3700 and disconnect the line cord. Also, remove any other
external power connected to the instrument or switching module(s).
Failure to remove power before removing (or installing) switching
modules may result in personal injury or death due to electric shock.
Series 3700 System Switch/Multimeter Reference Manual
Document Number: 3700S-901-01 Rev. A / August 2007