Keithley 3700 series Reference Manual page 72

Section 3: Using the Front Panel
FILTER key
Pressing this key enables/disables filter for selected function. When the filter is enabled, the
FILT annunciator will light. Also see
FILTER key configuration
Pressing the CONFIG key and then the FILTER key opens the FILTER MENU. This menu
contains the following menu items:




FUNC
Pressing this key selects the active DMM function for the channel. Related ICL command:
dmm.func
FILTER key configuration
Pressing the CONFIG key and then the FUNC key allows viewing of the available functions and
then selection of the active function. Turn the wheel (or press the cursor keys) to scroll through
available functions. Press the wheel (or the ENTER key) to make the displayed function active.
NOTE
LOAD key
Loads scripts, along with Lua chunks added with
execution. This key opens the LOAD TEST menu which contains the following menu items:


RUN key
Pressing this key runs last selected script or load menu item.
3-16
ENABLE: This menu item enables or disables filtered measurements for the selected
DMM function. Related ICL command:
COUNT: This menu item indicates the filter count setting for the selected DMM function.
Related ICL command:
TYPE: This menu item indicates the filter averaging type for the DMM measurements on
the selected DMM functions (MOVING or REPEAT). Related ICL command:
dmm.filter.type (on page 9-87)
WINDOW: This menu item indicates the filter window for the DMM measurements
(0-10% in 0.1% increments). Related ICL command:
(on page 9-91)
When using just the FUNC key (not in configuration mode of the FUNC key as this
topic is describing), the selected function takes effect immediately as you scroll though
the available functions. While in the configuration mode of the FUNC key, the function
takes effect for the highlighted function only when ENTER key is pressed (the function
does not change while scrolling).
USER: This menu item provides access to Lua chunks specified by
display.loadmenu.add
SCRIPTS: This menu item provides access to scripts created by the user. The scripts
can be directly executed.
Series 3700 System Switch/Multimeter Reference Manual
Filter (on page 4-6) in the reference manual.
dmm.filter.enable
dmm.filter.count (on page 9-86)
display.loadmenu.add
(on page 9-60) (not scripts).
Document Number: 3700S-901-01 Rev. A / August 2007
(on page 9-87)
dmm.filter.window (on page 9-88)
(on page 9-60) for