Keithley 3700 series Reference Manual page 66

Section 3: Using the Front Panel
SCAN key
If a scan list is present, this key opens the SCAN ACTION MENU that contains the following
menu items:
NOTE





SCAN key configuration
Pressing the CONFIG key and then the SCAN key opens the "SCAN ATTR MENU" that
contains:





3-10
Use the INSERT key to create and add the present active channel to the scan list.
EXECUTE: This menu item runs the scan. Related ICL command:
page 9-162)
CREATE: This menu item displays following message: Use <INSERT> key
LIST: This menu item displays the scan list (turn the wheel to scroll). Related ICL
command: scan.list (on page 9-163)
CLEAR: This menu item clears the scan list. Related ICL command:
page 9-160) (send with an empty string)
RESET: This menu item resets the scan settings to factory default values. Related ICL
command: scan.reset
ADD: This menu item instructs how to add an additional list of channels and/or channel
patterns to scan. When it displays "Use <INSERT> key", with selected channel or
channel pattern for adding to scan list on front panel, press the INSERT key when on the
main display. Related ICL command:
BYPASS: This menu item enables or disables bypassing the first item in the scan.
Related ICL command:
MODE: This menu item sets the scan.mode value to one of the following:
scan.MODE_OPEN_ALL or 0 (default setting),
scan.MODE_OPEN_SELECTIVE or 1
scan.MODE_FIXED_ABR or 2.
See related ICL command for definitions. Related ICL command:
164)
MEAS_CNT: This menu item sets the measure count value. Related ICL command:
scan.measurecount (on page 9-163)
SCAN_CNT: This menu item sets the scan count value. Related ICL command:
scan.scancount (on page 9-167)
Series 3700 System Switch/Multimeter Reference Manual
(on page 9-166)
scan.add
scan.bypass (on page 9-160)
Document Number: 3700S-901-01 Rev. A / August 2007
scan.execute
scan.create
(on page 9-157)
scan.mode
(on
(on
(on page 9-