Keithley 3700 series Reference Manual page 349

Series 3700 System Switch/Multimeter Reference Manual
status.system3.*
Also see
Example
status.system4.*
Attribute
Usage
Document Number: 3700S-901-01 Rev. A / August 2007
status.system.* (on page 9-201)
status.system2.* (on page 9-203)
status.system4.* (on page 9-205)
status.system5.* (on page 9-207)
Sets the extension bit of the system3 enable register:
status.system3.enable = status.system3.EXT
TSP-Link system4 data structure register set.
To read condition, enable and event registers:
enablereg = status.system4.condition
enablereg = status.system4.enable
enablereg = status.system4.event
To write to enable register:
status.system4.enable = enablereg
Set enablereg to one of the following values:
0 Clears all bits.
To set EXT bit (B0):
1 or status.system4.EXTENSION_BIT
- or -
1 or status.system4.EXT
To set a node bit (Bn); n = 43 to 56.
status.system4.NODEn
Section 9: Instrument Control Library (ICL)
.condition
.enable
.event
.condition
.enable
.event
9-205