Keithley 3700 series Reference Manual page 68

Section 3: Using the Front Panel
DBREF
Configures the DB reference setting for the DMM in volts. Related ICL command:
dmm.dbreference
DIGITS
Configures the display digits setting for the selected DMM function. Related ICL command:
dmm.displaydigits
DRYCIRCUIT
Configures the dry circuit setting for the selected DMM function. Related ICL command:
dmm.drycircuit
FILTER
Opens the FILTER MENU for the selected DMM function. See
page 3-16).
FUNC
Pressing this key selects the active DMM function for the channel. Related ICL command:
dmm.func
INPUTDIV
Enables or disables the 10M ohm input divider. Related ICL command:
page 9-93)
LIMIT
Opens the LIMIT MENU for the selected DMM function. See
15).
LINESYNC
Attribute configuring whether line sync is used during the measurement. Related ICL command:
dmm.linesync
3-12
(on page 9-84)
(on page 9-85)
(on page 9-91)
(on page 9-97)
Series 3700 System Switch/Multimeter Reference Manual
FILTER key configuration
LIMIT key configuration
Document Number: 3700S-901-01 Rev. A / August 2007
(on
dmm.inputdivider (on
(on page 3-