Consumables And Replacement Parts - Agilent Technologies 3200P User Manual

3 Troubleshooting and Maintenance

Consumables and replacement parts

Table 5 3200P pH Meter Consumables
Order No. Model and name
G4388A 3200SA Stirrer
G4389A 3200EA Electrode holder
G4390A Software package
5185-8389 Power adaptor
G4388-27000 Stirring bar
5190-3988 P3211 pH Combination electrode
5190-3989 P3212 pH Combination electrode
5190-3990 P3311 pH Triode combination electrode
5190-3991 P3111 pH Electrode
5190-3992 P3213 pH Combination electrode
5190-3993 P3214 pH Combination electrode
5190-4003 R8111 Reference electrode
5190-3999 ORP8211 ORP electrode
5190-3998 T7111 ATC Probe
5185-8390 ATC temperature diagnostic tool
5185-8391 Conductivity diagnostic tool
G4383-40000 Short circuit plug
60
Table 5 lists the consumables and replacement parts for the
3200P pH Meter.
Description
Electrode holder and magnetic stirrer should be combined to stir
solution with stable and precise speed with a large adjustable
range.
It is used to support different probes and electrodes.
3200P pH Meter can communicate with computer after this
software package is installed (including software and
communication cable).
100–240 VAC, 1 A, 50/60 Hz
It is used with stirrer.
Combination electrode, glass body and refillable
Combination electrode, plastic body and non-refillable
Triode combination electrode, with built-in ATC probe, glass
body and refillable
Glass body, single electrode
Combination electrode, plastic body, flat sensitive glass
membrane, refillable
Combination electrode, plastic body, spear-tip sensitive glass,
and non-refillable
Glass body, ceramic junction, Ag/AgCl and single-junction
Combination electrode, glass body and refillable
Stainless Steel
Temperature measurement range: 0–100 °C
Temperature troubleshooting
Conductivity troubleshooting
Used for zero potential calibration and troubleshooting.
3200P pH Meter User Guide