About Maintenance Menu - MIMAKI TS55-1800 Operation Manual

Chapter 4 Maintenance

About MAINTENANCE MENU

This provides various settings for performing maintenance.
The following items can be set in MAINTENANCE settings.
Local <Setup 1>
LOW 1620mm
POST1 POST2
30° /40° 30° /50°
TEST PRINT TEST PRINT
MENU MENU REMOTE REMOTE
CLEANING CLEANING
 MAINTENANCE MENUs at-a-glance
Local <Setup 1>
LOW 1620mm
POST1 POST2
30° /40° 30° /50°
TEST PRINT TEST PRINT
MENU MENU REMOTE REMOTE
CLEANING CLEANING
MAINTENANCE
>
STATION
NOZZLE RECOVERY >
AUTO MAINTENANCE >
FILL UP INK >
REPLACE WasteInkTank
 Screen transition when
Local <Setup 1>
LOW 1620mm
POST1 POST2
30° /40° 30° /50°
TEST PRINT TEST PRINT
MENU MENU REMOTE REMOTE
CLEANING CLEANING
4-4
MENU MAINTENANCE
SETUP > STATION
MAINTENANCE > NOZZLE RECOVERY
MACHINE SETUP > AUTO MAINTENANCE
NOZZLE CHECK > INK FILLING
INFORMATION > INK TANK EXCHANGE
MAINTENANCE MAINTENANCE
>
STATION STATION
NOZZLE RECOVERY > NOZZLE RECOVERY
AUTO MAINTENANCE > AUTO MAINTENANCE
FILL UP INK > FILL UP INK
REPLACE WasteInkTank REPLACE WasteInkTank
key is pressed
MAINTENANCE MAINTENANCE
TEST PRINT > TEST PRINT
CLEANING > CLEANING
STATION > STATION
Vacuum Cont. Running OFF Vacuum Cont. Running
: Press this to select MACHINE SETUP MENU, or to switch
to the previous screen.
: Press this to use the maintenance function.
: Press this to switch to the next screen.
: Use these to select a setting item.
: Press this to confirm a setting, etc..
>
>
>
>
>
MAINTENANCE
>
STATION
> NOZZLE RECOVERY
> AUTO MAINTENANCE
> FILL UP INK
REPLACE WasteInkTank
MAINTENANCE
> TEST PRINT
> CLEANING
> STATION
OFF Vacuum Cont. Running
MAINTENANCE
> >
STATION
> NOZZLE RECOVERY >
> AUTO MAINTENANCE >
> FILL UP INK >
REPLACE WasteInkTank
MAINTENANCE
> TEST PRINT >
> CLEANING >
> STATION >
OFF Vacuum Cont. Running OFF