Configuration Examples; Example For Configuring Basic Msdp Functions - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Context
Debugging affects the performance of the system. So, after debugging, execute the undo
debugging all command to disable it immediately.
When an MSDP fault occurs, run the following debugging commands in the user view to debug
MSDP and locate the fault.
Procedure
l
l
l
l
l
----End

8.11 Configuration Examples

Configuration examples are provided to show how to implement PIM-SM inter-domain
multicast through MBGP, how to implement inter-AS multicast through static RPF peers, and
how to configure anycast RP in a PIM-SM domain.

8.11.1 Example for Configuring Basic MSDP Functions

Networking Requirements
As shown in
domains; each PIM-SM domain has 0 or 1 multicast source and receiver. The receivers in PIM-
SM2 need to receive the multicast data sent by S3 in the PIM-SM3 domain and multicast data
sent by S1 in the PIM-SM1 domain.
Issue 01 (2011-10-26)
CAUTION
Run the debugging msdp all command in the user view to enable all the debugging of
MSDP.
Run the debugging msdp connect command in the user view to enable the debugging of
the resetting of the MSDP peer connection.
Run the debugging msdp event command in the user view to enable the debugging of
MSDP events.
Run the debugging msdp packet command in the user view to enable the debugging of
MSDP packets.
Run the debugging msdp source-active command in the user view to enable the debugging
of MSDP active sources.
Figure 8-1, two ASs exist on the network. Each AS contains one or more PIM-SM
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 MSDP Configuration
224