Clearing The Statistics On Mld Snooping; Debugging Mld Snooping - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
To clear the dynamic forwarding entries from the multicast forwarding table, run the following
command in the user view.
Procedure
Step 1 Run the reset mld-snooping group { vlan { vlan-id | all } | all } command to clear the dynamic
forwarding entries from the multicast forwarding table.
----End

10.8.2 Clearing the Statistics on MLD Snooping

Context
The statistics on MLD snooping cannot be restored after you clear them. So, confirm the action
before you use the command. To clear the statistics on MLD snooping, run the following
command in the user view.
Procedure
Step 1 Run the reset mld-snooping statistics [ vlan vlan-id ] command to clear the statistics on MLD
snooping in a VLAN.
----End

10.8.3 Debugging MLD Snooping

Context
Debugging affects the performance of the system. So, after debugging, run the undo debugging
mld-snooping all command to disable it immediately.
When a fault occurs in MLD Snooping, you can run the following debugging command in the
user view to debug MLD snooping and locate the fault.
Procedure
Step 1 Run the debugging mld-snooping [ all | event | done [ basic-acl-number ] | packet [advance-
acl-number ] | query [ advance-acl-number ] | report [ advance-acl-number ] | timer |
general ] command in the user view to enable debugging of MLD snooping.
----End
Issue 01 (2011-10-26)
CAUTION
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 MLD Snooping Configuration
273