Checking The Configuration - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast

8.8.5 Checking the Configuration

After filtering rules for SA messages are configured, you can run related commands to check
detailed information about MSDP peers and SA cache information.
Procedure
l
l
----End
Example
Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] peer-status [ peer-
address ] command, and you can view information about the (Source, Group)-based SA filtering
policy field and check whether the configuration is valid. For example:
<Quidway> display msdp peer-status
MSDP Peer 172.40.41.1, AS ?
Description:
Information about connection status:
Information about (Source, Group)-based SA filtering policy:
Information about SA-Requests:
Minimum TTL to forward SA with encapsulated data: 10
SAs learned from this peer: 0, SA Cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Peer authentication: unconfigured
Peer authentication type: none
Run the display msdp sa-cache command to check the information about (S, G) entries in SA
Cache.
l
l
l
<Quidway> display msdp sa-cache
MSDP Source-Active Cache Information of VPN-Instance: public net
MSDP Total Source-Active Cache - 3 entries
MSDP matched 3 entries
Issue 01 (2011-10-26)
Run the display msdp sa-cache [ group-address | source-address | { 2-byte-as-number |
*
4-byte-as-number } ]
Run the display msdp peer-status [ peer-address ] command to check detailed information
about the MSDP peer status.
State: Up
Up/down time: 00:26:41
Resets: 0
Connection interface: Vlanif10 (172.40.41.2)
Number of sent/received messages: 27/28
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 00:26:56
Import policy: 3000
Export policy: 3002
Policy to accept SA-Request messages: 2000
Sending SA-Requests status: enable
Count of RPF check failure: 0
Incoming/outgoing SA messages: 16/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
If group-address is specified, the (S, G) entry to which a specified group corresponds is
displayed.
If source-address is specified, the (S, G) entry to which a specified source corresponds is
displayed.
If 2-byte-as-number or 4-byte-as-number is specified, the (S, G) entry whose Origin RP
attribute belongs to a specified AS is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
command to check SA Cache of the public network instance.
8 MSDP Configuration
218