Checking The Configuration; Configuring Sa Cache - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Context
Do as follows on the switch on which the MSDP peer is created:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
msdp
The MSDP view is displayed.
Step 3 Run:
timer retry interval
The period for retrying sending the TCP connection request to the remote MSDP peer is set
----End

8.5.4 Checking the Configuration

After a TCP connection is set up between MSDP peers, you can run related commands to check
brief and detailed information about MSDP peers.
Procedure
l
l
----End
Example
<Quidway> display msdp brief
MSDP Peer Brief Information
Configured
2
Peer's Address
192.168.2.1
192.168.4.2

8.6 Configuring SA Cache

An SA cache is used to save the (S, G) information carried in SA messages locally. When a
device needs to receive multicast data, it directly obtains available (S, G) information from the
SA cache.
Issue 01 (2011-10-26)
Run the display msdp brief command to check the brief information about the statuses of
all remote peers that establish MSDP peer relationships with the local host.
Run the display msdp peer-status [ peer-address ] to check the detailed information about
the statuses of the specified remote peers that establish the MSDP peer relationships with
the local host.
Up
2
State
UP
UP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Listen Connect
0 0
Up/Down time AS
01:07:08 200
00:06:39 100
8 MSDP Configuration
Shutdown Down
0 0
SA Count Reset Count
8 0
13 0
208