Configuration Examples; Example For Configuring The Pim-Sm Network - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast

7.14 Configuration Examples

Configuration examples are provided to show how to construct a basic PIM-SM network and
configure basic functions of PIM-SM.

7.14.1 Example for Configuring the PIM-SM Network

Networking Requirements
As shown in
(ISP). The Interior Gateway Protocol (IGP) is deployed on the network. The unicast routing
routes work normally and are connected to the Internet. The routers on the network need to be
configured properly so that hosts can receive the video on demand (VOD) in multicast mode.
Figure 7-2 Networking diagram for configuring PIM-SM multicast network
Source
Switch
Switch A
Switch B
Switch C
Switch D
Switch E
Issue 01 (2011-10-26)
Figure 7-2, multicast is deployed on the network of an Internet Service Provider
Eth0/0/3
Ethernet
Eth0/0/2
Eth0/0/3
SwitchD
Eth0/0/4
Physical interface
Eth 0/0/1
Eth 0/0/2
Eth 0/0/3
Eth 0/0/1
Eth 0/0/2
Eth 0/0/1
Eth 0/0/2
Eth 0/0/1
Eth 0/0/2
Eth 0/0/3
Eth 0/0/4
Eth 0/0/1
Eth 0/0/2
Eth 0/0/3
Eth 0/0/4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SwitchA
Eth0/0/2
Eth0/0/1
SwitchE
Eth0/0/3
Eth0/0/1
Eth0/0/2
Eth0/0/4
Eth0/0/1
Eth0/0/1
Eth0/0/2
SwitchC
VLANIF interface
VLANIF 100
VLANIF 101
VLANIF 200
VLANIF 300
VLANIF 102
VLANIF 102
VLANIF 400
VLANIF 500
VLANIF 200
VLANIF 103
VLANIF 104
VLANIF 400
VLANIF 300
VLANIF 100
VLANIF 500
7 PIM-SM (IPv4) Configuration
Ethernet
PIM-SM
Leaf networks
Eth0/0/2
SwitchB
Eth0/0/1
Ethernet
IP address
192.168.9.1/24
10.110.1.1/24
192.168.1.1/24
192.168.2.1/24
10.110.2.1/24
10.110.2.2/24
192.168.3.1/24
192.168.4.2/24
192.168.1.2/24
10.110.5.1/24
10.110.4.1/24
192.168.3.2/24
192.168.2.2/24
192.168.9.2/24
192.168.4.1/24
N1
Receiver
HostA
Receiver
HostB
N2
180