Huawei Quidway s3700 series Configuration Manual page 196

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
# Set the range of SSM group addresses to 232.1.1.0/24 on all switches. The configurations of
Switch B, Switch C, Switch D, and Switch E are the same as the configuration of Switch A, and
are not provided here.
[SwitchA] acl number 2000
[SwitchA-acl-basic-2000] rule permit source 232.1.1.0 0.0.0.255
[SwitchA-acl-basic-2000] quit
[SwitchA] pim
[SwitchA-pim] ssm-policy 2000
Step 5 Verify the configuration.
# Run the display pim interface command. You can view the configuration and running status
of PIM on the interface. For example, the PIM information displayed on Switch C is as follows:
[SwitchC] display pim interface
VPN-Instance: public net
Interface
Vlanif102
Vlanif400
----End
Configuration Files
l
Issue 01 (2011-10-26)
State NbrCnt
up
up
Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 100 101 200
#
multicast routing-enable
#
acl number 2000
rule 5 permit source 232.1.1.0 0.0.0.255
#
interface Vlanif100
ip address 192.168.9.1 255.255.255.0
pim sm
#
interface Vlanif101
ip address 10.110.1.1 255.255.255.0
pim sm
igmp enable
igmp version 3
#
interface Vlanif200
ip address 192.168.1.1 255.255.255.0
pim sm
#
interface Ethernet0/0/1
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
interface Ethernet0/0/2
port hybrid pvid vlan 101
port hybrid untagged vlan 101
#
interface Ethernet0/0/3
port hybrid pvid vlan 200
port hybrid untagged vlan 200
#
ospf 1
area 0.0.0.0
network 10.110.1.0 0.0.0.255
network 192.168.1.0 0.0.0.255
network 192.168.9.0 0.0.0.255
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HelloInt DR-Pri
0 30
1 30
7 PIM-SM (IPv4) Configuration
DR-Address
1 10.110.2.2
1 192.168.3.1
(local)
183