Huawei Quidway s3700 series Configuration Manual page 46

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Figure 2-3 Networking diagram for configuring IGMP snooping SSM mapping
Source 1
10.1.1.1
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure a VLAN.
# Configure Switch A.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan 10
[SwitchA-vlan10] quit
[SwitchA] interface ethernet 0/0/1
[SwitchA-Ethernet0/0/1] port hybrid pvid vlan 10
Issue 01 (2011-10-26)
Internet/
Intranet
RouterA
Eth0/0/1
Eth0/0/2
SwitchA
SSM Mapping
VLAN10
Configure basic IGMP snooping functions so that users can receive multicast data from
multicast sources.
Configure an SSM group policy for IGMP snooping to add the ASM group addresses of
users to the SSM group address range.
Configure IGMP snooping SSM mapping so that users can receive multicast data from a
specified multicast source.
VLAN 10 to which Eth 0/0/1 and Eth 0/0/2 on Switch A are added
IGMPv3 run on Switch A and IGMPv2 run on Switch, Host 1, and Host 2
Multicast source address 10.1.1.2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Source 2
10.1.1.2
Swtich
Host1 Host2
2 IGMP Snooping Configuration
33