Checking The Configuration - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Context
Do as follows on the PIM-DM switch:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
The interface can be a VLANIF interface, or an Loopback interface.
Step 3 Run:
pim timer graft-retry interval
The interval for retransmitting Graft messages is set.
If the local switch does not receive any Graft-Ack message from the upstream switch in a
specified period, it resends a Graft message.
----End

6.8.3 Checking the Configuration

After the control parameters for graft are adjusted, you can check information about the
unacknowledged PIM-DM graft, PIM interface, and PIM routing table and statistics about PIM
control messages through commands.
Procedure
l
l
l
Issue 01 (2011-10-26)
Run the display pim interface [ interface-type interface-number | up | down ]
[ verbose ] command to check PIM on an interface.
Run the display pim control-message counters [ message-type { assert | hello | join-
prune | state-refresh | } | interface interface-type interface-number ]
the number of the sent or received PIM control messages.
Run the following commands to check the PIM routing table.
– display pim routing-table [ group-address [ mask { group-mask-length | group-
mask } ] | source-address [ mask { source-mask-length | source-mask } ] | incoming-
interface { interface-type interface-number | register } | outgoing-interface
{ include | exclude | match } { interface-type interface-number | register | none } |
mode { sm | ssm } | flags flag-value | fsm ]
[ number ] ]
– display pim routing-table [ group-address [ mask { group-mask-length | group-
mask } ] | source-address [ mask { source-mask-length | source-mask } ] | incoming-
interface { interface-type interface-number | register } | outgoing-interface
{ include | exclude | match } { interface-type interface-number | register | none } |
mode { sm | ssm } | flags flag-value | fsm ]
[ number ] ]
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 PIM-DM (IPv4) Configuration
*
*
[ outgoing-interface-number
*
[ outgoing-interface-number
command to check
121