Checking The Configuration - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Do as follows on two RPs of different ASs:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
msdp
MSDP is enabled in the public network instance, and the MSDP view is displayed.
Step 3 Run:
peer peer-address connect-interface interface-type interface-number
An MSDP peer connection is configured.
The parameters of the command are explained as follows:
l peer-address: specifies the address of a remote MSDP peer.
l interface-type interface-number: specifies the local interface connected to the remote MSDP
Step 4 (Optional) Run:
peer peer-address description text
The description of a remote MSDP peer is added.
The configuration helps to distinguish remote MSDP peers and manage the connections with
the remote MSDP peers.
The parameters of the command are explained as follows:
l peer-address: specifies the address of a remote MSDP peer.
l text: specifies the description text. The text is a string of up to 80 characters.
Step 5 Run:
static-rpf-peer peer-address [ rp-policy ip-prefix-name ]
A remote MSDP peer is statically specified as an RPF peer.
peer-address specifies the address of a remote MSDP peer.
----End

8.3.5 Checking the Configuration

After PIM-SM inter-domain multicast is configured, you can run related commands to check
brief and detailed information about MSDP peers.
Procedure
l
Issue 01 (2011-10-26)
peer.
Run the display msdp brief command to check the brief information about the statuses of
all remote peers that establish MSDP peer relationships with the local host.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 MSDP Configuration
199