Monitoring The Running Status Of Pim-Sm - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Context
The statistics of PIM control messages on an interface cannot be restored after you clear it. So,
confirm the action before you use the command.
Procedure
l
----End

7.13.2 Monitoring the Running Status of PIM-SM

During the routine maintenance, you can run the display commands in any view to know the
running of PIM.
Context
In routine maintenance, you can run the following commands in any view to check the running
status of PIM-SM.
Procedure
l
l
l
l
l
Issue 01 (2011-10-26)
CAUTION
Run the reset pim control-message counters [ interface interface-type interface-
number ] command in the user view to clear the statistics of PIM control messages on an
interface.
Run the display pim claimed-route [ source-address ] command in any view to check the
unicast routes used by PIM.
Run the display pim control-message counters [ message-type { assert | hello | join-
prune } | interface interface-type interface-number ]
number of sent or received PIM control messages.
Run the display pim interface [ interface-type interface-number | up | down ]
[ verbose ] command in any view to check PIM on an interface.
Run the command display pim neighbor [ neighbor-address | interface interface-type
interface-number | verbose ]
Run the following commands in any view to check the PIM routing table.
– display pim routing-table [ group-address [ mask { group-mask-length | group-
mask } ] | source-address [ mask { source-mask-length | source-mask } ] | incoming-
interface { interface-type interface-number | register } | outgoing-interface
{ include | exclude | match } { interface-type interface-number | register | none } |
mode { sm | ssm } | flags flag-value | fsm ]
[ number ] ]
– display pim routing-table [ group-address [ mask { group-mask-length | group-
mask } ] | source-address [ mask { source-mask-length | source-mask } ] | incoming-
interface { interface-type interface-number | register } | outgoing-interface
{ include | exclude | match } { interface-type interface-number | register | none } |
mode { sm | ssm } | flags flag-value | fsm ]
[ number ] ]
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
to check PIM neighbors.
*
[ outgoing-interface-number
*
[ outgoing-interface-number
7 PIM-SM (IPv4) Configuration
*
command in any view to check the
178