Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
10.4.1 Establishing the Configuration Task
Applicable Environment
You can configure policies to control the multicast groups that the hosts in a VLAN can join.
Pre-configuration Tasks
Before configuring a multicast group policy for a VLAN, complete the following task:
l
Data Preparation
To configure a multicast group policy for a VLAN, you need the following data.
No.
1
2
10.4.2 Configuring a Multicast Group Policy
Context
To configure a multicast group policy, do as follows on the S3700.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
mld-snooping group-policy acl-number [ mld-version ]
A multicast group policy is configured.
By default, no multicast group policy is available in a VLAN. That is, hosts in a VLAN can join
any multicast group. MLDv1/v2 is used.
Only a basic or advanced ACL6 can be used. Before configuring a multicast group policy, ensure
that an ACL6 has been created and a rule has been defined. For details, see Configuring ACL6.
Issue 01 (2011-10-26)
10.3 Configuring Basic Functions of MLD Snooping
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 MLD Snooping Configuration
Data
ID of the VLAN where the multicast group
policy is to be configured and number of the
interface connected to the multicast source in
the VLAN
(Optional) MLD version of the multicast
group policy
262