Huawei Quidway s3700 series Configuration Manual page 65

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
Figure 3-5 Networking diagram for configuring multicast VLAN replication based on interfaces
VLAN10
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
Procedure
Step 1 Create multicast VLANs 2 and 3 and enable IGMP snooping in the multicast VLANs.
<SwitchA> system-view
[SwitchA] igmp-snooping enable
[SwitchA] vlan 2
Issue 01 (2011-10-26)
Router
Source
Ethernet0/0/2
SwitchA
ISP1
ISP2
VLAN10
Receiver
HostA
Multicast Packet
Multicast VLAN 2
Multicast VLAN 3
Enable IGMP snooping globally.
Create multicast VLANs 2 and 3 and enable IGMP snooping in the multicast VLANs.
Create user VLAN 10.
Bind the user VLAN to multicast VLANs on Eth 0/0/2 and Eth 0/0/3.
Add the network-side interface and user-side interfaces to VLANs as hybrid interfaces.
Interface connected to the Router and the VLAN that the interface belongs to
User-side interfaces and the VLANs that the interfaces belong to
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/0
GE0/0/1
Ethernet0/0/3
Receiver
HostB
3 Multicast VLAN Replication Configuration
52